सामग्री पर जाएँ

साँचा:ज्ञानसन्दूक रास्ता

मुक्त ज्ञानकोश विकिपीडिया से
परिचय का प्रतीक साँचा परिचय[देखें] [संपादन] [इतिहास] [पर्ज]

This template generates an infobox for roads, both numbered and unnumbered. Below is the basic syntax needed to get a complete infobox for an article. Place this below any hatnotes and before any other text and fill in the variables. If a variable is empty, it should be omitted. Other, more specific, parameters exist and are described in detail below.

This is the basic code needed to set up an infobox for a numbered route.

{{Infobox road
| country =
| type =
| route =
| map =
| length_mi =
| length_km =
| length_ref =
| established =
| direction_a =
| terminus_a =
| junction =
| direction_b =
| terminus_b =
| previous_type =
| previous_route =
| next_type =
| next_route =
}}

This is the basic code needed to set up an infobox for an unnumbered route. See also {{infobox street}}.

{{Infobox road
| name =
| marker_image =
| map =
| length_mi =
| length_km =
| length_ref =
| established =
| allocation =
| direction_a =
| terminus_a =
| junction =
| direction_b =
| terminus_b =
}}

These parameters are typically used only for numbered routes.

  • country: the ISO 3166-1 alpha-3 code of the country that the route is in (not to be confused with the countries location parameter). Use this list to find the correct code for the country. These countries have had the necessary subtemplates set up; see that page for instructions on how to set up new countries. If the route is located in Australia, the United States, Canada, or Mexico, and the route is located within one state or province use state (Australia, US, and Mexico) or province (Canada) instead (not to confused with the states and provinces location parameters). The "state" and "province" parameters are not interchangeable. Accepted values for these two parameters are as follows:
    • Australian state: the two- or three-letter abbreviation of the state. Note: |country=AUS must also be set if the state is NT or WA to avoid conflicts with other countries.
    • U.S. state: the two-letter postal abbreviation of the state.
    • Canadian province: the two-letter postal abbreviation of the province.
    • Mexican state: the three-letter ISO 3166-2:MX code of the state, minus the "MX-" prefix.
  • type: the type of route the article is about. The type code can be used to make shield images appear automatically. See this page for a list.
  • subtype: the type of special route that the article route is, if applicable
  • county: the county associated with the route that the article is about (not to be confused with the counties location parameter). Use only for county routes.
  • route: the number of the route.
  • section: the section of code that defines this route. Very few areas use this, and the appropriate subpage ([[/law/USA]] for example) must be set up for the parameter to work. The state of Minnesota also uses subsection to specify the exact section of the legal code definition.
  • spur_type: defines the type of route that the route is a spur of. Use for spur routes, such as a loop road, bypass, alternate route, business route, truck route, or other type of route. Example: Use WV for West Virginia Route 10 Alternate.
  • spur_of: defines what the parent route is, such as Highway 7A's parent is Highway 7, or Interstate 110's parent is Interstate 10. The usual text that would go here is the road number, such as "7" or "10" or "500".
  • previous_type: this is the type of route that proceeds the current one in the system. See this page for a list.
  • previous_route: the number of the route preceding this one
  • previous_dab: any disambiguation needed to generate the correct link to the previous route
  • browse_route: the route associated with the current browse row. Typically used only if the browsing route is not the route that the rest of the infobox is about.
  • next_type: same as "previous_type" but for the route following this one
  • next_route: the number of the route succeeding this one
  • next_dab: same as "previous_dab" but for the route following this one
  • browse: use to add additional browse lines, which are generated by templates similar to {{ny browse}}. These templates accept the seven parameters given above plus "county"; however, "route" is used instead of "browse_route". See Category:Browse templates.

These parameters are typically used only for roads of a historic nature, such as the Silk Road.

  • time_period: the time period that the road existed in.
    • established_by: the body that built or established the road. Used only in conjunction with "time_period".
    • significance: the historical/cultural significance of the route. Used only in conjunction with "time_period".
    • related: roads related to the historical road. Used only in conjunction with "time_period".
  • margary: the Margary number of a Roman road in Britain.
  • marker_image: shield image to be displayed. Requires full wiki markup. Typically not needed for numbered routes. Can be set to 'none' to show no marker
  • name: road name to be displayed. Typically not needed for numbered routes.
  • maint: the agency that maintains the highway. If the appropriate subpage ([[/maint/USA]] for example) exists and a specific jurisdiction is specified (such as "state=AZ"), this parameter will be filled in automatically with that jurisdiction's department of transportation. "maint" still works, however, if the default agency needs to be overwritten, for instance if the route is maintained by another agency.
  • alternate_name: Use in situations where the entire route has another name. For example, New York State Route 590 is called the Sea Breeze Expressway for its entire length.
  • map: image name of a map for the route, without the File: namespace prefix, which the template will place into an image link for you. For example, map=map_name|map_alt=alt text will render as: [[File:map_name|290x172px|alt=alt text]]. Note: this will pull the file name from Wikidata if left empty and the associated item has the information.
    • map_alt: alt text for the map, for visually impaired readers. See WP:ALT. This parameter should be specified if map is specified.
    • map_notes: an optional parameter with text to display along with the map.
    • map_custom: optionally set to yes if you want to override the template's default image link; then you may specify your own complete image link with: map=[[File:map_name|...]]
    • For best results, your map image width should be 290px.
    • See the WP:USRD maps task force for maps for roads in the United States.
  • mapframe: show {{infobox mapframe}} provided map data is available. See #Mapframe maps for more parameters.
  • photo or image: image name of a photo for the route, without the File: namespace prefix, which the template will place into an image link for you. For example, photo=photo_name|photo_alt=alt text will render as: [[File:photo_name|290px|alt=alt text]].
    • photo_width or image_width: sets the width in pixels of non-map images. Default value is 290.
    • photo_alt or image_alt: alt text for the photo, for visually impaired readers. See WP:ALT. This parameter should be specified if photo is specified.
    • photo_notes or image_notes: an optional parameter with text to display along with the photo.
    • This set of parameters will not work for articles in the United States per WP:USRD consensus.
  • length_mi or length_km: length of the route in miles (in countries where the imperial system is used) or kilometres (in countries where the metric system is used). Only one can be used in an article. The value from the one defined is the one that appears first. The other is calculated and rounded to the same level of precision as the stated value. If neither "length_mi" nor "length_km" exists, no length is displayed.
    • length_ref, if defined, appears after the first length. Use a citation for the length (wrapped in <ref>...</ref> tags) or {{fact}} here. Be sure that the first length is the one for which you have a reference.
    • length_notes, if defined, appears as a note below the length. This can be used to show former length, or future length, etc.
  • status: the status of cancelled or under construction roadways; this will not show unless the infobox uses |header_type= with historic, former or under construction values (or their alternates).
  • established: this is the date or year in which the route was commissioned or assigned to its current alignment. (Alternate parameter: formed)
  • decommissioned: the date or year the route was decommissioned (Alternate parameter: deleted)
  • history: a brief summary of the route's history. Typically used in place of the above two parameters.
  • known_for: if defined, prints any notable landmarks on the road with an independent article; eg: Stonehenge, Angel of the North
  • allocation: a list of highway designations allocated to the roadway. For Australia, this uses a label of "Allocation:" while for other countries it will use "Component highways:" instead.
  • tourist: a list of the tourist routes that follow the route; currently only set up for use in Australia, New Zealand, Canada, and the US.
  • restrictions: a brief mention of any restrictions on the road. Examples include regular seasonal closures or permit requirements needed by motorists.
  • nhs: sections of the road included in the U.S. National Highway System (NHS) network. If the entire road is part of the NHS, input "Entire route". This parameter is automatically generated for U.S. Interstate Highways (with type=I).
  • Basic parameters:
    • mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no
      • The default value of the mapframe parameter is also modified by the internal onByDefault parameter. Default: yes, unless any of these are present: |map=, |map_custom=, d:Property:P15
    • mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
    • mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified
    • mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
    • mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default: coordinates from Wikidata
    • mapframe-wikidata – Set to
      yes
      
      to show shape/line features from the wikidata item, if any, when |coord= is set. Default: yes
  • Customise which features are displayed:
    • mapframe-shape – Turn off display of shape feature by setting to
      none
      
      . Use an inverse shape (geomask) instead of a regular shape by setting to
      inverse
      
      . Default: not specified
    • mapframe-point – Turn off display of point feature by setting to
      none
      
      . Force point marker to be displayed by setting to
      on
      
      . Default: not specified
    • mapframe-line – Turn off display of line feature by setting to
      none
      
      . Default: not specified
    • mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for देश (P17), P131 for प्रशासनिक क्षेत्रीय इकाई में स्थित (P131)). Default: not specified
    • mapframe-switcher – set to
      auto
      
      or
      geomasks
      
      or
      zooms
      
      to enable Template:Switcher-style switching between multiple mapframes. Default: not specified
      • auto
        
        – switch geomasks found in स्थान (P276) and प्रशासनिक क्षेत्रीय इकाई में स्थित (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.
      • geomasks
        
        – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter
      • zooms
        
        – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of
        3
        
        ), "zoomed out" is
        1
        
        , and "zoomed midway" is the average
  • Other optional parameters:
    • mapframe-frame-width or mapframe-width – Frame width. Default: 290
    • mapframe-frame-height or mapframe-height – Frame height. Default: 200
    • mapframe-shape-fill – Color used to fill shape features. Default: #606060
    • mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
    • mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
    • mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
    • mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: not specified (i.e. blank)
      • Can also be set to
        blank
        
        to override any default marker symbol
    • mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
    • mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
    • mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
    • mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
    • mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
    • mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
    • mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
    • mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates
    • mapframe-type – Set the type of the object, with the same usage as {{coord}}. Default: not specified
    • mapframe-population – Set the population, useful with type="city", for {{Infobox dim}}. Default: not specified


  • beltway_city, orbital, loop, or tloop: for beltways, orbitals, loop roads, or tourist loops only. This is the city that the beltway/orbital/loop encircles. The output differs between the three to accommodate variation in English for different geographic areas. In the case of tourist loops, using |tloop=none will omit a location around which the roadway would loop.
  • direction_a: for U.S. roads, this should be either "South" or "West" per the standards set by the U.S. Roads project. For roads in other jurisdictions, consult that area's WikiProject to determine which direction to put here.
  • terminus_a or end_a: this is where the route begins and, for U.S. roads, is either at the southern terminus or western terminus
  • junction: a list of major junctions. Each WikiProject has different standards for major junctions, so consult the relevant WikiProject for more details. Uses plainlist class so {{Plainlist}} is not necessary; only a bulleted list is needed.
  • direction_b: The opposite of "direction_a"
  • terminus_b or end_b: where the route ends, in accordance with the guidelines set forth with terminus_a

This template is capable of creating separate "major intersection" sections for individual segments of a route that is split into two to four segments. The parameters associated with this feature are:

  • section#, where # is the number of the segment (1 being the first entered into the infobox, 2 being the next, and so on). By default, the text "Major intersections" is replaced in the header with "Section #"; this parameter allows for a custom header to be used.
  • length_mi# or length_km#: "length_mi" or "length_km" for the # segment
    • length_ref#: "length_ref" for the # segment
    • length_notes#: "length_notes" for the # segment
  • direction_a: same as described above; however, in this usage it will provide a default direction for the beginning point of all of the segments. If the direction of one endpoint is different, use direction_a# for that endpoint.
  • terminus_a# or end_a#: "terminus_a"/"end_a" for the # segment
  • junction#: "junction" for the # segment
  • direction_b: same as described above; however, in this usage it will provide a default direction for the ending point of all of the segments. If the direction of one endpoint is different, use direction_b# for that endpoint.
  • terminus_b# or end_b#: for the # segment

This infobox has several parameters to list locations; however, many are restricted to use in only certain regions or countries for various reasons, including but not limited to local WikiProject consensus and common sense (for example, "countries" shouldn't be used on intra-country articles, and since the only locations with rural municipalities are Manitoba and Saskatchewan, "rural_municipalities" should be used there and nowhere else). Updates in 2022 added many new parameters for describing locations and made them available to more locations. Even where usage is possible, each parameter is still optional on an article-by-article basis based on local consensus.

Available location parameters by listed country
Country Subdivision Parameter Location description
Asian Highway Network
ASIA
|countries= Countries, only wikilinks
Australia
AUS
|state= State, two-letter abbreviation; |country=AUS is required for |state=WA
Territory, two-letter abbreviation (ACT, JBT, or NT); |country=AUS is required for |state=NT
|states= States, will not display if |state= is used
|lga= Local government areas; links based on state
|locations= Major settlements, Major suburbs, or Suburb based on type
Brazil
BRA
|state= State; two-letter abbreviation
Federal district; two-letter abbreviation (DF)
|states= States, will not display if |state= is used
Canada
CAN
All locations |province= Province, two-letter abbreviation
Territory, two-letter abbreviation (NT, NU, or YK)
|provinces= Provinces, will not display if |province= is used
Alberta
AB
|rural_municipalities= Specialized and rural municipalities
|areas= Special areas
|districts= Improvement districts
British Columbia
BC
|districts=
|rural_municipalities=
Regional districts
Manitoba
MB
|rural_municipalities= Rural municipalities
New Brunswick
NB
|counties= Counties
|parishes= Parishes
Northwest Territories
NT
|regions= Regions
Nova Scotia
NS
|counties= Counties
Nunavut
NU
|regions= Regions
Ontario
ON
|rural_municipalities= Municipalities
|counties= Counties
|regions= Regions
|districts= Districts
|divisions= Divisions
Prince Edward Island
PE
|counties= Counties
|parishes= Parishes
Québec
QC
|rural_municipalities= Regional county municipalities
|territories= Equivalent territories
Saskatchewan
SK
|rural_municipalities= Rural municipalities
Yukon
YK
China
CHN
Hong Kong SAR
HKG
|districts= Districts
Macau SAR
MAC
All other locations |province= Province; two-letter abbreviation
|provinces= Provinces; two-letter abbreviation, will not display if |province= is used
|regions= Autonomous regions
International E-road Network
EUR
|countries= Countries, only wikilinks
France
FRA
French Guiana
GUF
Guadaloupe
GLP
Martinique
MTQ
Mayotte
MYT
Reunion
REU
All other locations |regions= Regions
|departments= Departments
India
IND
|state= State; two-letter abbreviation
Union territory; two-letter abbreviation (AN, CH, DH, DL, JK, LA, LD, PY)
|states= States, will not display if |state= is used
|territories= Union territories
|districts= Districts
Mexico
MEX
|state= State; three-letter abbreviation
Autonomous city; three-letter abbreviation (CMX)
|states= States, will not display if |state= is used
Kingdom of the
Netherlands
Netherlands
NLD
|provinces= Provinces
Aruba
ABW
Curaçao
CUW
Sint Maarten
SXM
Russia
RUS
|oblasts= Oblasts
|republics= Republics
|okrugs= Autonomous okrugs
|krais= Krais
|federal_cities= Federal cities
Spain
ESP
|province= Province, one- or two-letter abbreviation; will display the appropriate autonomous community automatically
|provinces= Provinces, will not display if |province= is used
|community= Autonomous community, two-letter abbreviation; only use for inter-provincial routes
|communities= Autonomous communities; will not display if |community= is used
United Kingdom Generic usage
GBR
|counties= Counties
England
ENG
|counties= Counties
|boroughs= Boroughs
Northern Ireland
NIR
|districts= Districts
Scotland
SCT
|areas= Council areas
Wales
WLS
|counties= Counties
|boroughs= County boroughs
Guernsey
GGY
|parishes= Parishes
Isle of Man
IMN
|sheadings= Sheadings
Jersey
JEY
|parishes= Parishes
Anguilla
AIA
|districts= Districts
Bermuda
BMU
|parishes= Parishes
British Indian Ocean Territory
IOT
British Virgin Islands
VGB
|districts= Districts
Cayman Islands
CYM
|districts= Districts
Falkland Islands
FLK
Gibraltar
GIB
Montserrat
MSR
|parishes= Parishes
Pitcairn Islands
PCN
Saint Helena, Ascension and
Tristan da Cunha
SHN
|island= Island
South Georgia and the
South Sandwich Islands
SGS
Turks and Caicos Islands
TCA
|districts= Districts
All locations |destinations= Primary destinations
United States
USA
All locations |state= State, two-letter abbreviation
Territory, two-letter abbreviation (AS, GU, MP, PR, or VI)
Federal district, two-letter abbreviation (DC)
|states= States, will not display if |state= is used
|indep_city= Independent city
|indep_cities= Independent cities, will not display if |indep_city= is used
Alaska
AK
|borough= Borough
|boroughs= Boroughs, will not display if |borough= is used
Louisiana
LA
|parish= Parish
|parishes= Parishes, will not display if |parish= is used
Puerto Rico
PR
|municipality= Municipality
|municipalities= Municipalities, will not display if |municipality= is used
All other locations |county= County
|counties= Counties, will not display if |county= is used
Available location parameters for all other countries
Parameter Location description
|country= Country
|countries= Countries, will not display if |country= is used
|island= Island
|communities= Communities
|regions= Regions
|provinces= Provinces
|states= States
|governorates= Governorates
|counties= Counties
|departments= Departments
|cantons= Cantons
|prefectures= Prefectures
|divisions= Divisions
|oblasts= Oblasts
|districts= Districts
|parishes= Parishes
|communes= Communes
|territories= Territories
|location1= |label1= Generic label
|location2= |label2= Generic label
|location3= |label3= Generic label
|location4= |label4= Generic label
|location5= |label5= Generic label
|subregions= Subregions
|subcounties= Subcounties
|subprefectures= Subprefectures
Available municipal parameters for all countries except the United States
Parameter Location description
|municipalities= Municipalities
|cities= Major cities
|towns= Towns
|villages= Villages
|destinations= Primary destinations
  • header_type: IBR has a small set of alternate header shades for specific sets of articles. They are:
    • under construction: for roads where construction has begun on the highway and no sections have been opened to traffic. Do not use for roads that are open to traffic in some capacity. (Alternate values: const, uc)
    • historic: for roads of a historic nature, such as auto trails or highways posted with brown, historical or scenic signage. (Alternate values: historical, hist, scenic)
    • former: for highway designations no longer maintained by the corresponding government authority. (Alternate value: decommissioned)
    • minor: UK only. For A roads signed with black-on-white markers.
  • system: the highway system that the article route is part of. Typically not needed for numbered routes.
  • system#, where # is the number of the next additional highway system to be displayed (1 being the first entered into the infobox, 2 being the next, and so on).
  • e-road, ahn, tahn or mrn: used to indicate that a roadway is part of the International E-road network in Europe, the Asian Highway Network, the Trans-African Highway network or the Arab Mashreq International Road Network.
    • e-road-shield, ahn-shield, tahn-shield or mrn-shield: shield or route marker image for the E-road, AHN, TAHN or MRN route. Requires full wiki markup.
  • embedded: embed another infobox with such capability like {{Designation list}} and {{Infobox NRHP}}.
मॉड्यूल:Infobox_road/route में पंक्ति 107 पर लुआ त्रुटि: bad argument #1 to 'wikitext' (string or number expected, got boolean)।
नक्शा
New Jersey Turnpike mainline and spurs highlighted in green
Route information
लंबाई117.20 मील[1][2] (188.62 kमी॰)
(Mainline)
  • 11.03 मील (17.75 kमी॰)—Western Spur[3]
  • 6.55 मील (10.54 kमी॰)—Pennsylvania Extension[1]
  • 8.17 मील (13.15 kमी॰)—Newark Bay Extension[4]
  • 5.20 मील (8.37 kमी॰)—I-95 Extension[1]
  • 148.18 मील (238.47 kमी॰)—Total Length of Turnpike including Extensions
स्थापना1951–present
Component
highways
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। (unsigned) from Pennsville Township to Mansfield Township
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। from Burlington Township to Fort Lee
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। Newark Bay Extension from Newark to Jersey City
प्रतिबंधBuses and commercial vehicles must use outer roadways between Exits 6 and 14
Major junctions
South endमॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। in Pennsville near the Delaware Memorial Bridge
Major intersections
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। in Mount Laurel
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। in Mansfield Township
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। in Robbinsville Township
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। in Edison
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। in Woodbridge Township
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। in Elizabeth
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। in Newark
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। in Kearny
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। in Secaucus
  • मॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। in Teaneck
North endमॉड्यूल:Jct में पंक्ति 204 पर लुआ त्रुटि: attempt to concatenate local 'link' (a boolean value)। in Fort Lee near the George Washington Bridge
Location
CountryUnited States
State[[package.lua में पंक्ति 80 पर लुआ त्रुटि: module 'Module:ISO 3166/data/US' not found।|package.lua में पंक्ति 80 पर लुआ त्रुटि: module 'Module:ISO 3166/data/US' not found।]]
CountiesSalem, Gloucester, Camden, Burlington, Mercer, Middlesex, Union, Essex, Hudson, Bergen
Highway system
package.lua में पंक्ति 80 पर लुआ त्रुटि: module 'Module:ISO 3166/data/US' not found।
Error: package.lua:80: module 'Module:Road data/strings/USA/NJ' not foundRoute 700 Error: package.lua:80: module 'Module:Road data/strings/USA/NJ' not found
Error: package.lua:80: module 'Module:Road data/strings/USA/NJ' not foundRoute 100 Error: package.lua:80: module 'Module:Road data/strings/USA/NJ' not found
Error: package.lua:80: module 'Module:Road data/strings/USA/NJ' not foundRoute 300 Error: package.lua:80: module 'Module:Road data/strings/USA/NJ' not found
{{Infobox road
| state = NJ
| type = NJTP
| map = {{maplink-road|from=New Jersey Turnpike.map}}
| map_custom = yes
| map_notes = New Jersey Turnpike mainline and spurs highlighted in green
| map_alt = Map of New Jersey with a long red line running from the southwest corner of the state to the northeast corner of the state signifying the mainline, three short red lines signifying the spur routes
| length_mi = 117.20
| length_ref = <ref name="sld 1" /><ref name="sld 0">{{cite web |author = New Jersey Department of Transportation |url = http://www.state.nj.us/transportation/refdata/sldiag/pdf/00000700__-.pdf |title = Route 700 Straight Line Diagram |access-date = March 17, 2020 |publisher = New Jersey Department of Transportation |url-status = live |archive-url = https://web.archive.org/web/20160304211723/http://www.state.nj.us/transportation/refdata/sldiag/00000700__-.pdf |archive-date = March 4, 2016 |df = mdy-all |author-link = New Jersey Department of Transportation }}</ref><!--equation is 76.78+52.17-6.55=122.4-->
| length_notes = (Mainline) {{plainlist|
* {{cvt|11.03|mi|km}}—Western Spur<ref name="sld 2">{{cite web |author = New Jersey Department of Transportation |url = http://www.state.nj.us/transportation/refdata/sldiag/pdf/00000095W_-.pdf |title = Route 95W Straight Line Diagram |access-date = March 17, 2020 |publisher = New Jersey Department of Transportation |url-status = live |archive-url = https://web.archive.org/web/20160113180423/http://www.state.nj.us/transportation/refdata/sldiag/00000095W_-.pdf |archive-date = January 13, 2016 |df = mdy-all }}</ref>
* {{cvt|6.55|mi|km}}—Pennsylvania Extension<ref name="sld 1">{{cite web |author = New Jersey Department of Transportation |url = http://www.state.nj.us/transportation/refdata/sldiag/pdf/00000095__-.pdf |title = Route 95 Straight Line Diagram |access-date = March 17, 2020 |publisher = New Jersey Department of Transportation |url-status = live |archive-url = https://web.archive.org/web/20160304210126/http://www.state.nj.us/transportation/refdata/sldiag/00000095__-.pdf |archive-date = March 4, 2016 |df = mdy-all }}</ref>
* {{cvt|8.17|mi|km}}—Newark Bay Extension<ref name="sld 3">{{cite web |author = New Jersey Department of Transportation |url = http://www.state.nj.us/transportation/refdata/sldiag/pdf/00000078__-.pdf |title = Route 78 Straight Line Diagram |access-date = March 17, 2020 |publisher = New Jersey Department of Transportation |url-status = live |archive-url = https://web.archive.org/web/20160304212003/http://www.state.nj.us/transportation/refdata/sldiag/00000078__-.pdf |archive-date = March 4, 2016 |df = mdy-all }}</ref>
* {{cvt|5.20|mi|km}}—I-95 Extension<ref name="sld 1" />
* {{cvt|148.18|mi|km}}—Total Length of Turnpike including Extensions
}}
| established = 1951
| allocation =
* {{Jct|state=NJ|Route|700|nolink=yes|noshield1=yes}} (unsigned) from [[Pennsville Township, New Jersey|Pennsville Township]] to [[Mansfield Township, Burlington County, New Jersey|Mansfield Township]]
* {{jct|state=NJ|I-Toll|95}} from [[Burlington Township, New Jersey|Burlington Township]] to [[Fort Lee, New Jersey|Fort Lee]]
* {{jct|state=NJ|I-Toll|78}} Newark Bay Extension from [[Newark, New Jersey|Newark]] to [[Jersey City, New Jersey|Jersey City]]
| restrictions = Buses and commercial vehicles must use outer roadways between Exits 6 and 14
| direction_a = South
| direction_b = North
| terminus_a = {{jct|state=NJ|I|295|US|40|US|130}} in [[Pennsville Township, New Jersey|Pennsville]] near the [[Delaware Memorial Bridge]]
| junction =
* {{jct|state=NJ|NJ|73}} in [[Mount Laurel, New Jersey|Mount Laurel]]
* {{jct|state=NJ|I-Toll|95|PAEX|nolink2=yes}} in [[Mansfield Township, Burlington County, New Jersey|Mansfield Township]]
* {{jct|state=NJ|I|195}} in [[Robbinsville Township, New Jersey|Robbinsville Township]]
* {{jct|state=NJ|I|287|NJ|440}} in [[Edison, New Jersey|Edison]]
* {{jct|state=NJ|GSP||US|9}} in [[Woodbridge Township, New Jersey|Woodbridge Township]]
* {{jct|state=NJ|I|278}} in [[Elizabeth, New Jersey|Elizabeth]]
* {{jct|state=NJ|I-Toll|78|NBEX||US|1-9|nolink2=yes}} in [[Newark, New Jersey|Newark]]
* {{jct|state=NJ|I|280}} in [[Kearny, New Jersey|Kearny]]
* {{jct|state=NJ|NJ|495}} in [[Secaucus, New Jersey|Secaucus]]
* {{jct|state=NJ|I|80}} in [[Teaneck, New Jersey|Teaneck]]
| terminus_b = {{jct|state=NJ|I|95|US|1-9|US|46|NJ|4|US|9W|PIP|}} in [[Fort Lee, New Jersey|Fort Lee]] near the [[George Washington Bridge]]
| counties = [[Salem County, New Jersey|Salem]], [[Gloucester County, New Jersey|Gloucester]], [[Camden County, New Jersey|Camden]], [[Burlington County, New Jersey|Burlington]], [[Mercer County, New Jersey|Mercer]], [[Middlesex County, New Jersey|Middlesex]], [[Union County, New Jersey|Union]], [[Essex County, New Jersey|Essex]], [[Hudson County, New Jersey|Hudson]], [[Bergen County, New Jersey|Bergen]]
| previous_type = I
| previous_route = 695
| browse_route = Route&nbsp;700
| next_type = I
| next_route = 895
| browse = {{nj browse|previous_type=I|previous_route=95|route=Route&nbsp;100|next_type=NJ-old|next_route=101
}}{{nj browse|previous_type=I|previous_route=295|route=Route&nbsp;300|next_type=NJ|next_route=303}}
}}

Example references

  1. 1 2 3 New Jersey Department of Transportation. "Route 95 Straight Line Diagram" (PDF). New Jersey Department of Transportation. मार्च 4, 2016 को मूल से पुरालेखित (PDF). अभिगमन तिथि: मार्च 17, 2020.
  2. New Jersey Department of Transportation. "Route 700 Straight Line Diagram" (PDF). New Jersey Department of Transportation. मार्च 4, 2016 को मूल से पुरालेखित (PDF). अभिगमन तिथि: मार्च 17, 2020.
  3. New Jersey Department of Transportation. "Route 95W Straight Line Diagram" (PDF). New Jersey Department of Transportation. जनवरी 13, 2016 को मूल से पुरालेखित (PDF). अभिगमन तिथि: मार्च 17, 2020.
  4. New Jersey Department of Transportation. "Route 78 Straight Line Diagram" (PDF). New Jersey Department of Transportation. मार्च 4, 2016 को मूल से पुरालेखित (PDF). अभिगमन तिथि: मार्च 17, 2020.
TemplateData documentation used by VisualEditor and other tools
See the monthly parameter usage report for this template.

TemplateData for ज्ञानसन्दूक रास्ता

An infobox template for highway articles.

साँचे के पैरामीटर्स[साँचा डेटा सम्पादित करें]

इस साँचे के लिए पैरामीटरों के ब्लॉक प्रारूपण को प्राथमिकता दी जाती है।

पैरामीटरविवरणप्रकारस्थिति
Countrycountry

The ISO 3166-1 alpha-3 code of the country the route is in.

स्ट्रिंगवैकल्पिक
Statestate

The two to three letter abbreviation of the Australian, U.S., or Mexican state the route is in.

स्ट्रिंगवैकल्पिक
Provinceprovince

The two letter postal abbreviation of the Canadian province the route is in.

स्ट्रिंगवैकल्पिक
Typetype

The type code of the route from Template:Infobox_road/doc/type.

स्ट्रिंगवैकल्पिक
Route numberroute

The number of the route.

स्ट्रिंगवैकल्पिक
Marker imagemarker_image

Marker image or shield to be displayed. Use full wiki markup. Not needed for numbered routes, usually.

सामग्रीवैकल्पिक
Namename

The name of the road (not used for numbered routes).

स्ट्रिंगवैकल्पिक
Alternate namealternate_name

The alternate name of the road. Use only when the entire route has that name.

स्ट्रिंगवैकल्पिक
Maintenancemaint

The agency that maintains the road. Numbered routes have this automatically populated.

स्ट्रिंगवैकल्पिक
Mapmap

The file name of the map of the road, without File:. If this is blank and the map is available on Wikidata, it will be used.

स्ट्रिंगवैकल्पिक
Map alternate textmap_alt

The alternate text for the map, for visually impaired readers.

स्ट्रिंगवैकल्पिक
Map notesmap_notes

Text to display with the map.

स्ट्रिंगवैकल्पिक
Show mapframe mapmapframe

Specify yes or no to show or hide the map, overriding the default

डिफ़ॉल्ट
no
उदाहरण
yes
स्ट्रिंगसुझावित
Mapframe captionmapframe-caption

Caption for the map. If mapframe-geomask is set, then the default is "Location in <<geomask's label>>"

स्ट्रिंगवैकल्पिक
Custom mapframemapframe-custom

Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, other mapframe parameters will be ignored.

साँचावैकल्पिक
Mapframe Wikidata itemmapframe-id id qid

Id (Q-number) of Wikidata item to use.

डिफ़ॉल्ट
(item for current page)
स्ट्रिंगवैकल्पिक
Mapframe coordinatesmapframe-coordinates mapframe-coord coordinates coord

Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template.

डिफ़ॉल्ट
(coordinates from Wikidata)
उदाहरण
{{Coord|12.34|N|56.78|E}}
साँचावैकल्पिक
Mapframe shapes from Wikidatamapframe-wikidata

et to yes to show shape/line features from the wikidata item, if any, when coordinates are specified by parameter

उदाहरण
yes
स्ट्रिंगवैकल्पिक
Mapframe shape featuremapframe-shape

Override display of mapframe shape feature. Turn off by setting to "none". Use an inverse shape (geomask) instead of a regular shape by setting to "inverse"

स्ट्रिंगवैकल्पिक
Mapframe point featuremapframe-point

Override display of mapframe point feature. Turn off display of point feature by setting to "none". Force point marker to be displayed by setting to "on"

स्ट्रिंगवैकल्पिक
Mapframe geomaskmapframe-geomask

Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for country, or P131 for located in the administrative territorial entity)

उदाहरण
Q100
पृष्ठ का नामवैकल्पिक
Mapframe switchermapframe-switcher

Set to "auto" or "geomasks" or "zooms" to enable Template:Switcher-style switching between multiple mapframes. IF SET TO auto – switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country. IF SET TO geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter. IF SET TO zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average.

स्ट्रिंगवैकल्पिक
Mapframe widthmapframe-frame-width mapframe-width

Frame width in pixels

डिफ़ॉल्ट
270
संख्यावैकल्पिक
Mapframe heightmapframe-frame-height mapframe-height

Frame height in pixels

डिफ़ॉल्ट
200
संख्यावैकल्पिक
Mapframe shape fillmapframe-shape-fill

Color used to fill shape features

डिफ़ॉल्ट
#606060
स्ट्रिंगवैकल्पिक
Mapframe shape fill opacitymapframe-shape-fill-opacity

Opacity level of shape fill, a number between 0 and 1

डिफ़ॉल्ट
0.5
संख्यावैकल्पिक
Mapframe stroke colormapframe-stroke-color mapframe-stroke-colour

Color of line features, and outlines of shape features

डिफ़ॉल्ट
#ff0000
स्ट्रिंगवैकल्पिक
Mapframe stroke widthmapframe-stroke-width

Width of line features, and outlines of shape features

डिफ़ॉल्ट
5
संख्यावैकल्पिक
Mapframe markermapframe-marker

Marker symbol to use for coordinates; see [[mw:Help:Extension:Kartographer/Icons]] for options

उदाहरण
museum
स्ट्रिंगवैकल्पिक
Mapframe marker colormapframe-marker-color mapframe-marker-colour

Background color for the marker

डिफ़ॉल्ट
#5E74F3
स्ट्रिंगवैकल्पिक
Mapframe geomask stroke colormapframe-geomask-stroke-color mapframe-geomask-stroke-colour

Color of outline of geomask shape

डिफ़ॉल्ट
#555555
स्ट्रिंगवैकल्पिक
Mapframe geomask stroke widthmapframe-geomask-stroke-width

Width of outline of geomask shape

डिफ़ॉल्ट
2
संख्यावैकल्पिक
Mapframe geomask fillmapframe-geomask-fill

Color used to fill outside geomask features

डिफ़ॉल्ट
#606060
स्ट्रिंगवैकल्पिक
Mapframe geomask fill opacitymapframe-geomask-fill-opacity

Opacity level of fill outside geomask features, a number between 0 and 1

डिफ़ॉल्ट
0.5
संख्यावैकल्पिक
Mapframe zoommapframe-zoom

Set the zoom level, from "1" to "18", to used if the zoom level cannot be determined automatically from object length or area

डिफ़ॉल्ट
10
उदाहरण
12
संख्यावैकल्पिक
Mapframe length (km)mapframe-length_km

Object length in kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area

संख्यावैकल्पिक
Mapframe length (mi)mapframe-length_mi

Object length in miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area

संख्यावैकल्पिक
Mapframe area (km^2)mapframe-area_km2

Object arean square kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area

संख्यावैकल्पिक
Mapframe area (mi^2)mapframe-area_mi2

Object area in square miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area

संख्यावैकल्पिक
Mapframe frame coordinatesmapframe-frame-coordinates mapframe-frame-coord

Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}

उदाहरण
{{Coord|12.35|N|56.71|E}}
साँचावैकल्पिक
mapframe-linemapframe-line

कोई विवरण नहीं

अज्ञातवैकल्पिक
Mapframe typemapframe-type

Type of the object rendered in the mapframe, like with {{coord}}.

स्ट्रिंगवैकल्पिक
Photophoto image

A photo to display, without File:. Does not work in the US.

फ़ाइलवैकल्पिक
Photo alternate textphoto_alt image_alt

The alternate text for the photo, for visually impaired readers.

स्ट्रिंगवैकल्पिक
Photo notesphoto_notes image_notes

Text to display with the map.

स्ट्रिंगवैकल्पिक
Map custommap_custom

Use yes if you want to override the template's default image link; then use the Map parameter to specify a link instead.

स्ट्रिंगवैकल्पिक
Length in mileslength_mi

If and only if the route is in a country on the imperial system, list the length in miles here.

संख्यावैकल्पिक
Length in kilometreslength_km

If and only if the route is in a country on the metric system, list the length in kilometres here.

संख्यावैकल्पिक
Length referencelength_ref

A reference for the given length.

स्ट्रिंगवैकल्पिक
Length noteslength_notes

Notes for the length.

स्ट्रिंगवैकल्पिक
Statusstatus

The status of the route.

सामग्रीवैकल्पिक
Establishedestablished formed

Date the route was commissioned.

स्ट्रिंगवैकल्पिक
Decommissioneddecommissioned deleted

Date the route was decommissioned.

स्ट्रिंगवैकल्पिक
Historyhistory

Summary of the route's history, instead of the established and decommissioned fields.

सामग्रीवैकल्पिक
Allocationallocation

Highway designations allocated to the roadway.

स्ट्रिंगवैकल्पिक
Tourist routestourist

Tourist routes that follow the route (Australia, New Zealand, Canada, US).

स्ट्रिंगवैकल्पिक
Restrictionsrestrictions

Summary of the route's restrictions such as closures or permits.

स्ट्रिंगवैकल्पिक
Direction Adirection_a

The first direction.

स्ट्रिंगवैकल्पिक
Direction Bdirection_b

The second direction.

स्ट्रिंगवैकल्पिक
Terminus Aterminus_a end_a

The first terminus.

स्ट्रिंगवैकल्पिक
Terminus Bterminus_b end_b

The second terminus.

स्ट्रिंगवैकल्पिक
Major junctionsjunctions junction

A brief list of major junctions. In the US, do not use more than 10.

स्ट्रिंगवैकल्पिक
Beltway citybeltway_city

The city the beltway encircles.

स्ट्रिंगवैकल्पिक
Orbital cityorbital

The city the orbital encircles.

स्ट्रिंगवैकल्पिक
Loop road cityloop

The city the loop road encircles.

स्ट्रिंगवैकल्पिक
Tourist loop citytloop

The city the tourist loop encircles.

स्ट्रिंगवैकल्पिक
Time periodtime_period

The time period the road existed in.

स्ट्रिंगवैकल्पिक
Established byestablished_by

If a time period is used, the body that built or established the road.

स्ट्रिंगवैकल्पिक
Significancesignificance

If a time period is used, the historical/cultural significance of the route.

स्ट्रिंगवैकल्पिक
Related roadsrelated

If a time period is used, roads related to the historical road.

स्ट्रिंगवैकल्पिक
Subtypesubtype

If the route is a spur or a special route.

स्ट्रिंगवैकल्पिक
Spur typespur_type

The type of the parent route that this is a spur of.

स्ट्रिंगवैकल्पिक
Spur ofspur_of

The parent route of this spur route.

स्ट्रिंगवैकल्पिक
County (for county routes)county

The county associated with the route that the article is about. Use only for county routes.

स्ट्रिंगवैकल्पिक
Previous route typeprevious_type

The type code of the previous route in the system from Template:Infobox_road/doc/type.

स्ट्रिंगवैकल्पिक
Next route typenext_type

The type code of the next route in the system from Template:Infobox_road/doc/type.

स्ट्रिंगवैकल्पिक
Previous routeprevious_route

The number of the previous route in the system.

स्ट्रिंगवैकल्पिक
Next routenext_route

The number of the next route in the system.

स्ट्रिंगवैकल्पिक
Previous route disambiguationprevious_dab

The disambiguation suffix of the previous route in the system.

स्ट्रिंगवैकल्पिक
Next route disambiguationnext_dab

The disambiguation suffix of the next route in the system.

स्ट्रिंगवैकल्पिक
Browse routebrowse_route

The number of the current route in the system, if not the same as the rest of the infobox.

स्ट्रिंगवैकल्पिक
Additional browse linesbrowse

Use to add additional browse lines with additional templates

स्ट्रिंगवैकल्पिक
List of countriescountries

A list of countries the route enters (EUR, ASIA)

स्ट्रिंगवैकल्पिक
List of regionsregions

A list of regions the route enters (EUR, ITA, HRV, CZE, CYP, GRC, POL, HUN, SVN, SVK, AUT, TUR, UKR, BIH, SRB, SGP)

स्ट्रिंगवैकल्पिक
List of statesstates

A list of states the route enters (USA in multiple states, IND, DEU)

स्ट्रिंगवैकल्पिक
List of provincesprovinces

A list of provinces the route enters (IRN, TUR, THA)

स्ट्रिंगवैकल्पिक
List of countiescounties

A list of counties the route enters (anywhere)

स्ट्रिंगवैकल्पिक
List of parishesparishes

A list of parishes the route enters (Louisiana)

स्ट्रिंगवैकल्पिक
List of rural municipalitiesrural_municipalities

A list of countries the route enters (Manitoba, Saskatchewan)

स्ट्रिंगवैकल्पिक
List of municipalitiesmunicipalities

A list of municipalities the route enters (Puerto Rico)

स्ट्रिंगवैकल्पिक
List of districtsdistricts

A list of districts the route enters (India, other countries with districts)

स्ट्रिंगवैकल्पिक
List of boroughsboroughs borough

A list of boroughs the route enters (Alaska)

स्ट्रिंगवैकल्पिक
List of divisionsdivisions

A list of divisions the route enters (Ontario)

स्ट्रिंगवैकल्पिक
List of citiescities

A list of cities the route enters (everywhere but USA)

स्ट्रिंगवैकल्पिक
List of townstowns

A list of towns the route enters (everywhere but USA)

स्ट्रिंगवैकल्पिक
List of villagesvillages

A list of villages the route enters (everywhere but USA)

स्ट्रिंगवैकल्पिक
List of destinationsdestinations

A list of primary destinations the route enters (AUS, GBR, IRL, MYS, NZL, IND)

स्ट्रिंगवैकल्पिक
List of LGAslga

A list of LGAs the route enters (Australia)

स्ट्रिंगवैकल्पिक
List of locationslocations

A list of locations the route enters (Australia)

स्ट्रिंगवैकल्पिक
Section of codesection

The section of the highway code the route is defined in.

स्ट्रिंगवैकल्पिक
Subsection of codesubsection

The subsection of the highway code the route is defined in (for Minnesota only).

स्ट्रिंगवैकल्पिक
Header typeheader_type

under construction, historic, former, freeway (Canada only), minor (UK only)

स्ट्रिंगवैकल्पिक
Highway systemsystem

The highway system the article route is a part of. Typically not used for numbered routes.

स्ट्रिंगवैकल्पिक
E-roade-road

The E-road that the route is a part of (Europe).

स्ट्रिंगवैकल्पिक
E-road route marker imagee-road-shield

Route marker image for the E-road that the route is a part of (Europe). Requires full wiki markup.

स्ट्रिंगवैकल्पिक
Asian Highway Network designationahn

The Asian Highway that the route is a part of.

स्ट्रिंगवैकल्पिक
Asian Highway route marker imageahn-shield

Route marker image for the Asian Highway that the route is a part of. Requires full wiki markup.

स्ट्रिंगवैकल्पिक
Trans-African Highway designationtahn

The Trans-African Highway that the route is a part of.

स्ट्रिंगवैकल्पिक
Trans-African Highway route marker imagetahn-shield

Route marker image for the Trans-African Highway that the route is a part of. Requires full wiki markup.

स्ट्रिंगवैकल्पिक
Header for section 1section1

If the route is divided into sections, this is the header for section 1.

डिफ़ॉल्ट
Section 1
स्ट्रिंगवैकल्पिक
Section 1 length in mileslength_mi1

If and only if the route is in a country on the imperial system, list the length in miles on section 1 here.

संख्यावैकल्पिक
Section 1 length in kilometreslength_km1

If and only if the route is in a country on the metric system, list the length in kilometres on section 1 here.

संख्यावैकल्पिक
Length reference for section 1length_ref1

A reference for the given length for section 1.

स्ट्रिंगवैकल्पिक
Length notes for section 1length_notes1

Notes for the length for section 1.

स्ट्रिंगवैकल्पिक
Direction A for section 1direction_a1

The first direction for section 1, to override direction_a.

स्ट्रिंगवैकल्पिक
Direction B for section 1direction_b1

The second direction for section 1, to override direction_b.

स्ट्रिंगवैकल्पिक
Terminus A for section 1terminus_a1 end_a1

The first terminus for section 1.

स्ट्रिंगवैकल्पिक
Terminus B for section 1terminus_b1 end_b1

The second terminus for section 1.

स्ट्रिंगवैकल्पिक
Major junctions for section 1junctions1

A brief list of major junctions for section 1. In the US, do not use more than 10.

स्ट्रिंगवैकल्पिक
Header for section 2section2

If the route is divided into sections, this is the header for section 2.

डिफ़ॉल्ट
Section 2
स्ट्रिंगवैकल्पिक
Section 2 length in mileslength_mi2

If and only if the route is in a country on the imperial system, list the length in miles on section 2 here.

संख्यावैकल्पिक
Section 2 length in kilometreslength_km2

If and only if the route is in a country on the metric system, list the length in kilometres on section 2 here.

संख्यावैकल्पिक
Length reference for section 2length_ref2

A reference for the given length for section 2.

स्ट्रिंगवैकल्पिक
Length notes for section 2length_notes2

Notes for the length for section 2.

स्ट्रिंगवैकल्पिक
Direction A for section 2direction_a2

The first direction for section 2, to override direction_a.

स्ट्रिंगवैकल्पिक
Direction B for section 2direction_b2

The second direction for section 2, to override direction_b.

स्ट्रिंगवैकल्पिक
Terminus A for section 2terminus_a2 end_a2

The first terminus for section 2.

स्ट्रिंगवैकल्पिक
Terminus B for section 2terminus_b2 end_b2

The second terminus for section 2.

स्ट्रिंगवैकल्पिक
Major junctions for section 2junctions2

A brief list of major junctions for section 2. In the US, do not use more than 10.

स्ट्रिंगवैकल्पिक
Header for section 3section3

If the route is divided into sections, this is the header for section 3.

डिफ़ॉल्ट
Section 3
स्ट्रिंगवैकल्पिक
Section 3 length in mileslength_mi3

If and only if the route is in a country on the imperial system, list the length in miles on section 3 here.

संख्यावैकल्पिक
Section 3 length in kilometreslength_km3

If and only if the route is in a country on the metric system, list the length in kilometres on section 3 here.

संख्यावैकल्पिक
Length reference for section 3length_ref3

A reference for the given length for section 3.

स्ट्रिंगवैकल्पिक
Length notes for section 3length_notes3

Notes for the length for section 3.

स्ट्रिंगवैकल्पिक
Direction A for section 3direction_a3

The first direction for section 3, to override direction_a.

स्ट्रिंगवैकल्पिक
Direction B for section 3direction_b3

The second direction for section 3, to override direction_b.

स्ट्रिंगवैकल्पिक
Terminus A for section 3terminus_a3 end_a3

The first terminus for section 3.

स्ट्रिंगवैकल्पिक
Terminus B for section 3terminus_b3 end_b3

The second terminus for section 3.

स्ट्रिंगवैकल्पिक
Major junctions for section 3junctions3

A brief list of major junctions for section 3. In the US, do not use more than 10.

स्ट्रिंगवैकल्पिक
Header for section 4section4

If the route is divided into sections, this is the header for section 4.

डिफ़ॉल्ट
Section 4
स्ट्रिंगवैकल्पिक
Section 4 length in mileslength_mi4

If and only if the route is in a country on the imperial system, list the length in miles on section 4 here.

संख्यावैकल्पिक
Section 4 length in kilometreslength_km4

If and only if the route is in a country on the metric system, list the length in kilometres on section 4 here.

संख्यावैकल्पिक
Length reference for section 4length_ref4

A reference for the given length for section 4.

स्ट्रिंगवैकल्पिक
Length notes for section 4length_notes4

Notes for the length for section 4.

स्ट्रिंगवैकल्पिक
Direction A for section 4direction_a4

The first direction for section 4, to override direction_a.

स्ट्रिंगवैकल्पिक
Direction B for section 4direction_b4

The second direction for section 4, to override direction_b.

स्ट्रिंगवैकल्पिक
Terminus A for section 4terminus_a4 end_a4

The first terminus for section 4.

स्ट्रिंगवैकल्पिक
Terminus B for section 4terminus_b4 end_b4

The second terminus for section 4.

स्ट्रिंगवैकल्पिक
Major junctions for section 4junctions4

A brief list of major junctions for section 4. In the US, do not use more than 10.

स्ट्रिंगवैकल्पिक
Translated titletranslation

A translation of the title, displayed as a subheading.

सामग्रीवैकल्पिक

See Infobox road/doc/tech for details on the inner workings of the template, including a list of tracking categories.

    Click the "+" below to see all subcategories:
    श्रेणी Infobox road instances by country नहीं मिली।