सामग्री पर जाएँ

साँचा:Infobox mill building/doc

मुक्त ज्ञानकोश विकिपीडिया से

{{infobox mill building}} may be used to summarize information about a building. It can be used in two ways with named parameters or with ten unnamed parameters.

{{Infobox mill building
| name                 = 
| building_name        = 
| native_building_name = 
| alternate_names      = 
| image                = 
| caption              = 
| textile_type         = 
| power_source         = 
| mill-process         = 
| altitude             = 
| building_type        = 
| architectural_style  = 
| structural_system    = 
| cost                 = 
| employees            = 
<!-- For titles and maps-- geo info-->
| location            = 
| location_town       = 
| location_country    = 
| altitude            = 
| map_type            = 
| latitude            = 
| longitude           = 
| serving_canal       = 
| serving_railway     = 
| serving_river       = 
| owner               = 
| owner_2             = 
| acquisition_date_2  = 
| owner_3             = 
| acquisition_date_3  = 
| owner_4             = 
| acquisition_date_4  = 
| current_tenants     = 
| current_owner       = 
| coordinates         = 
| oscoor              = 
| start_date          = 
| completion_date     = 
| renovation_date     = 
| re-equipment_date_2 = 
| re-equipment_date_3 = 
| change_of_use_date  = 
| current_status      = 
| demolition_date     = 
| destruction_date    = 
<!-- Dimensions-->
| height              = 
| other_dimensions    = 
| floor_count         = 
| floor_area          = 
| floor_height        = 
| floor_usage         = 
| floor_construction  = 
<!-- The building team -->
| main_contractor     = 
| architect           = 
| architecture_firm   = 
| structural_engineer = 
| other_designers     = 
| awards              = 
| ren_architect       = 
| ren_firm            = 
| ren_oth_designers   = 
| ren_qty_surveyor    = 
| ren_awards          = 
<!-- Steam powered-->
| engine_date           = 
| engine_decommissioned = 
| engine_maker          = 
| engine_type           = 
| engine_valve          = 
| engine_throw          = 
| engine_rpm            = 
| engine_kWatt          = 
| engine_hp             = 
| engine_fly_diameter   = 
| transmission_type     = 
| no_of_ropes           = 
| boilers               = 
| boiler_temperature    = 
| psi                   = 
<!-- Watermills -->
| wheels                  = 
| diameter_of_water_wheel = 
| width_of_wheel          = 
| wheel_rpm               = 
<!-- Equipment-->
| equipment_maker   = 
| date_of_equipping = 
| no_of_looms       = 
| cotton_count      = 
| scutchers         = 
| carding_engines   = 
| doublers          = 
| kiers             = 
| other_equipment   = 
| mule_frames       = 
| ring_frames       = 
<!-- References-->
| embedded          = 
| references = 
}}

Unnamed parameters

  1. Mill name
  2. Location
  3. Coordinate
  4. Reference
  5. Notes- Description (not yet displayed)
  6. Image
  7. Architect/Owner (some lists use different info (not yet displayed)
  8. Built
  9. Decommissioned
  10. Demolished

The purpose of this is to allow lists of mills to be constructed using the {{TMbegin}}, {{TMtr}}, {{TMend}} sequence. The {{TMtr}} can be copied directly across into a new article and renamed {{Infobox mill building}} as the unnamed parameters transfer directly across. The new Infobox can then be edited, and as new data is input it will over-ride potentially conflicting parameters. Similarly, any {{Infobox mill building}} named-parameters can safely be added to a {{TMtr}} call, as they will be safely ignored while on the list page- but will then be valid here if a copy is made.

The named parameters are seen in the section below.

Regent Mill
Regent Mill in 1950
Cotton
Spinning (ring mill)
वास्तु शैलीStanding, usage changed
संरचना प्रणालीRed engineering brick
स्थितिFailsworth, Oldham
जल स्रोतRochdale Canal
रेल मार्गOldham Loop Line
उत्तराधिकार
  • LCC (1930)
  • Salton ()
निर्देशांकSD789345 53°30′31″N 2°09′37″W / 53.5087°N 2.1604°W / 53.5087; -2.1604
Construction
निर्मित1906
नष्टChimney 1964
तल संख्या4
भूमि क्षेत्रफ़ल345 फीट (105 मी॰) by 130 फीट (40 मी॰)
भूमि प्रयोगIn 1950:
  • cellar: a warehouse, yarn cellar, waste room, cotton room, and dust room.
  • The first floor was the card room,
  • The second floor was the ring frame room
  • The third floor was the winding, warping and beaming room.
अन्य परिमाणChimney 210 फीट (64 मी॰)
अभिकल्पन दल
वास्तुकारGeorge Stott
Power
दिनाँक1906
इंजन निर्माताBuckley and Taylor of Oldham
डीकमीशण्ड1958
इंजन प्रकारmarine type vertical triple expansion engine
सिलिण्डर व्यास एवं फ़ेंक क्षमता63-inch diameter low-pressure cylinder
घूर्णन (चक्र प्रति मिनट)64
स्थापित अश्व शक्ति1800 ihp sometimes loaded to 2000 ihp
फ़्लाईव्हील व्यास26 फीट (7.9 मी॰)
ट्राँस्मीशन प्रकारrope
No. of ropes26 ropes
Boiler configuration
बॉयलर? Dual Lancashire ?
सन्दर्भ
Dunkerley, Philip. "Dunkerley-Tuson Family Website, The Regent Cotton Mill, Failsworth". अभिगमन तिथि 2009-01-09.
{{Infobox mill building
| building_name       = Regent Mill
| native_building_name= 
| alternate_names     =
| image               = Mill-image-pending.jpg
| caption             = Regent Mill in 1950 
| textile_type        = [[Cotton]]
| building_type       = [[Cotton-spinning machinery|Spinning (ring mill)]]
| power_source        = Steam
| architectural_style = 
| structural_system   = Red engineering brick
| cost                = 
| location            = [[Failsworth]], Oldham
| serving_canal       = [[Rochdale Canal]]
| serving_railway     = [[Oldham Loop Line]]
| owner               =
| owner_2             = LCC  
| acquisition_date_2  = 1930
| owner_3             = Salton
| acquisition_date_3  =
| owner_4             =
| acquisition_date_4  =
| current_tenants     = 
| coordinates         = {{coord|53.5087|-2.1604|display=inline|region:GB|format=dms}}
| oscoor              = SD 789345
| altitude            = 
| start_date          = 1906
| completion_date     = 
| change_of_use_date  = 1958
| renovation_date     = 
| demolition_date     = Chimney 1964
| current_status      = Standing, usage changed
| height              = 
| other_dimensions    = Chimney {{convert|210|ft|m}}
| floor_count         = 4
| floor_area          = {{convert|345|ft|m}} by {{convert|130|ft|m}}
| floor_height        = 
| floor_usage         = In 1950:
*cellar: a warehouse, yarn cellar, waste room, cotton room, and dust room. 
*The first floor was the card room, 
*The second floor was the ring frame room 
*The third | architecture_firm   =
| structural_engineer = 
| other_designers     = 
| awards              = 
| engine_date         = 1906
| engine_decommissioned  = 1958
| engine_maker        = [[Buckley and Taylor of Oldham]]
| engine_type         = marine type vertical triple expansion engine
| engine_valve        =
| engine_cylinder     = 63-inch diameter low-pressure cylinder
| engine_rpm          = 64
| engine_kWatt        =
| engine_ihp          = 1800 ihp sometimes loaded to 2000 ihp
| engine_fly_diameter = {{convert|26|ft|m}}
| transmission_type   = rope
| no_of_ropes         = 26 ropes
| boilers             = ? Dual Lancashire ?
| boiler_temperature  =
| psi                 =
| spindles            = 60000
| references          = {{cite web|url=http://dunkerley-tuson.co.uk/regentmill.aspx|title=Dunkerley-Tuson Family Website, The Regent Cotton Mill, Failsworth|last=Dunkerley|first=Philip|accessdate=2009-01-09}}
}}

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

hCard uses HTML classes including:

  • adr
  • agent
  • category
  • county-name
  • extended-address
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • region
  • street-address
  • uid
  • url
  • vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

  • geo
  • latitude
  • longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.