ISO मानकों की सूची
Jump to navigation
Jump to search
30pxयह लेख या कुछ अंश अपनी मूल भाषा में है, जिससे कि इन तथ्यों की मौलिकता बनी रहे। कृप्या इसे अनुवाद करने का प्रयास न करें, या पहले संवाद पृष्ठ पर चर्चा करके फिर सुधार करें।
This is a list of ISO standards that are discussed in Wikipedia articles. For a list of all the more than 16,000 ISO standards (as of 2007), see the ISO Catalogue.
About 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely/publicly available.
== ISO 1–ISO 999 ==vx
- ISO 1 Standard reference temperature for geometrical product specification and verification
- ISO 3 Preferred numbers
- ISO 7 Pipe threads where pressure-tight joints are made on the threads
- ISO 9 Information and documentation – Transliteration of Cyrillic characters into Roman characters – Slavic and non-Slavic languages
- ISO 16:1975 Acoustics – Standard tuning frequency (Standard musical pitch)
- ISO 31 Quantities and units
- ISO 68-1 Basic profile of metric screw threads
- ISO 216 paper sizes, e.g. the A4 paper size
- ISO 226 Phon based on Fletcher-Munson curves
- ISO 226:2003 Phon based on newer Equal-loudness contours
- ISO 233:1984 Transliteration of Arabic characters into Roman characters
- ISO 233-2:1993 Transliteration of Arabic characters into Roman characters – Part 2: Arabic language – Simplified transliteration
- ISO 259:1984 Documentation – Transliteration of Hebrew characters into Roman characters
- ISO 262 Selected metric-screw-thread sizes for screws, bolts, and nuts
- ISO 639 Codes for the representation of names of languages
- ISO/IEC 646 internationalized 7 bit ASCII variants
- ISO 657 Hot-rolled steel sections
- ISO 668 Specification for Shipping Containers
- ISO 690 bibliographic references
- ISO 732 Photography – 120-size and 220-size films – Dimensions
- ISO 838 Standard for punching filing holes into paper
- ISO 843:1997 Conversion of Greek characters into Roman characters
- ISO 999 Guidelines for the content, organization, and presentation of indexes
अनुक्रम
ISO 1000–ISO 9999[संपादित करें]
- ISO 1000 SI units and recommendations for the use of their multiples and of certain other units
- ISO 1007 135 film format
- ISO/IEC 1539 Fortran programming language
- ISO 1629 Establishes a system of terms and nomenclature for polymers
- ISO/IEC 2022 Information technology: Character code structure and extension techniques
- ISO 2108 International standard book numbering (ISBN)
- ISO 2145 Numbering of divisions and subdivisions in written documents
- ISO 2171 Cereals and milled cereal products – Determination of total ash
- ISO 2281 Water-resistant watches
- ISO 2533 Standard Atmosphere
- ISO 2709 Format for information exchange (e.g. MARC)
- ISO 3029 126 film format
- ISO 3082 Iron ores – Sampling and sample preparation procedures
- ISO 3103 Method of brewing tea for the purpose of sensory tests
- ISO 3166 codes for countries and subdivisions
- ISO 3166-1 codes for country and dependent area names, first published in 1974
- ISO 3166-1 alpha-2 two-letter country codes
- ISO 3166-1 alpha-3 three-letter country codes
- ISO 3166-1 numeric
- ISO 3166-2 principal subdivisions of a country or dependent area.
- ISO 3166-3 superseded ISO 3166-1 codes, first published in 1998.
- ISO 3166-1 codes for country and dependent area names, first published in 1974
- ISO 3297 International standard serial number (ISSN)
- ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners.
- ISO 3602 Romanization of Japanese
- ISO 3632 Quality of Saffron
- ISO 3864 Safety labels
- ISO 3901 International Standard Recording Code (ISRC)
- ISO 3977 Design and procurement standards for gas turbine system applications
- ISO 4157 Subdivision of construction works
- ISO 4157-1: buildings and part of buildings
- ISO 4157-2: room numbers
- ISO 4157-3: room identifiers
- ISO 4217 Currency codes
- ISO/IEC 4873:1991 8-bit code for information interchange
- ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
- ISO 5167-1 Part 1: General principles and requirements
- ISO 5167-2 Part 2: Orifice plates
- ISO 5167-3 Part 3: Nozzles and Venturi nozzles
- ISO 5167-4 Part 4: Venturi tubes
- ISO 5218 Representation of human sexes
- ISO 5455 Technical drawings: scales
- ISO 5775 Bicycle tyres and rims
- ISO 5800 Photographic Film speed
- ISO 5964 Guidelines for the Establishment and Development of Multilingual Thesauri
- ISO 6166 structure of an International Securities Identifying Number (ISIN)
- ISO 6344 Coated abrasives – Grain size analysis
- ISO 6344-1 Part 1: Grain size distribution test
- ISO 6344-2 Part 2: Determination of grain size distribution of macrogrits P12 to P220
- ISO 6344-3 Part 3: Determination of grain size distribution of microgrits P240 to P2500
- ISO 6429 Information technology: Control functions for coded character sets
- ISO 6438 Documentation – African coded character set for bibliographic information interchange
- ISO 6709 Standard representation of latitude, longitude and altitude for geographic point locations
- ISO 6946 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method
- ISO 7001 Public Information Symbols
- ISO 7098 Romanization of Chinese
- ISO 7372 Trade data interchange
- ISO/IEC 7501-1:1997 Identification cards – Machine readable travel documents (Part 1: Machine readable passport; Part 2: Machine readable visa; Part 3: Machine readable official travel documents)
- ISO 7736 Car radio installation space
- ISO 7810 Standards for financial cards (credit and debit cards)
- ISO 7811 Recording technique on identification cards
- ISO 7816 Smartcards
- ISO/IEC 7942 Graphical Kernel System
- ISO 8090 Cycles – Terminology
- ISO 8373 Manipulating Industrial Robots – Vocabulary
- ISO 8501-1 Preparation of steel substrates before application of paints and related products
- ISO 8555 Environmental management systems.
- ISO 8583 Financial transaction card originated messages – Interchange message specifications
- ISO 8583-1 Part 1: Messages, data elements and code values
- ISO 8583-2 Part 2: Application and registration procedures for Institution Identification Codes (IIC)
- ISO 8583-3 Part 3: Maintenance procedures for messages, data elements and code values
- ISO 8601 Date and time representation
- ISO/IEC 8613 Open Document Architecture
- ISO/IEC 8632 Computer Graphics Metafile
- ISO 8651 Graphical Kernel System language bindings
- ISO/IEC 8652: Information technology – Programming languages – Ada
- ISO 8805 Graphical Kernel System for Three Dimensions and the C language bindings are ISO 8806.
- ISO 8806-4 Graphical Kernel System for Three Dimensions, C language bindings
- ISO 8807: Language Of Temporal Ordering Specification (LOTOS)
- ISO/IEC 8824 Abstract Syntax Notation One (ASN.1)
- ISO/IEC 8825 ASN.1 Encoding Rules
- ISO 8859 8-bit coded character sets
- ISO 8859-1 Latin-1
- ISO 8859-2 Latin-2
- ISO 8859-3 Latin-3 or "South European"
- ISO 8859-4 Latin-4 or "North European"
- ISO 8859-5 Cyrillic
- ISO 8859-6 Arabic
- ISO 8859-7 Greek
- ISO 8859-8 Hebrew
- ISO 8859-9 Latin-5
- ISO 8859-10 Latin-6, rearrangement of 8859-4
- ISO 8859-11 Thai
- ISO 8859-13 Latin-7 or "Baltic Rim"
- ISO 8859-14 Latin-8 or "Celtic"
- ISO 8859-15 Latin-9, revision of 8859-1
- ISO 8859-16 Latin-10 South-Eastern European languages and others
- ISO 8879 Standard Generalized Markup Language (SGML)
- ISO 9000 Quality management system in production environments
- ISO 9001 Quality management
- ISO 9069 SGML support facilities — SGML Document Interchange Format (SDIF)
- ISO/IEC 9075 SQL
- ISO 9126 Software quality model
- ISO 9141 Network interconnection of computers in a vehicle
- ISO 9241 Ergonomic requirements for office work with visual display terminals
- ISO 9362 Bank Identifier Code or BIC system
- ISO 9407 Shoe sizes
- ISO 9564 Banking — Personal Identification Number (PIN) management and security (in ATM and POS systems)
- ISO/IEC 9579 Remote database access for SQL
- ISO 9592, ISO 9593 PHIGS (Programmer's Hierarchical Interactive Graphics System)
- ISO 9660 CD-ROM file system
- ISO 9869 Thermal insulation - Building elements - In-situ measurements of thermal resistance and thermal transmittance
- ISO 9899 C programming language
- ISO/IEC 9945 Portable Operating System Interface (POSIX)
- ISO 9984 Conversion of Georgian characters into Roman characters
- ISO 9985 Conversion of Armenian characters into Roman characters
- ISO 9992:1999 Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards
- ISO 9999 Technical aids for persons with disabilities. Classification and terminology
ISO 10000–ISO 19999[संपादित करें]
- ISO 10006 Quality management – Guidelines to quality in project management
- ISO 10007 Quality management – Guidelines for configuration management
- ISO/IEC 10021 Message Oriented Text Interchange Systems (MOTIS)
- ISO/IEC 10026 Open Systems Interconnection
- ISO 10077 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance
- ISO/IEC 10089 Information technology; 130 mm rewritable optical disk cartridge for information interchange - 650 MB per cartridge
- ISO 10160 Interlibrary Loan Application Service Definition - defines terminology used in interlibrary loan
- ISO 10161 Interlibrary Loan Application Protocol
- ISO/IEC 10179:1996 Document Style Semantics and Specification Language (DSSSL)
- ISO 10202:1991 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
- ISO 10211 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
- ISO 10279 BASIC programming language
- ISO 10303 Industrial automation systems and integration – Product data representation and exchange. Known as STEP, STandard for the Exchange of Product data
- ISO 10383 Securities and related financial instruments - Codes for exchanges and market identification (MIC)
- ISO 10487 Connections for passenger car stereos
- ISO 10628 Flow diagrams for process plants
- ISO 10646 Universal Character Set (equivalent to Unicode's character set)
- ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
- ISO 10957 Information and documentation – International Standard Music Number (ISMN)
- ISO 10962 Securities and related financial instruments - Classification of Financial Instruments (CFI code)
- ISO 11064 Ergonomic Design of Control Centres
- ISO 11062-1:2000 Part 1: Principles for the design of control centres
- ISO 11062-2:2000 Part 2: Principles for the arrangement of control suites
- ISO 11062-3:1999 Part 3: Control room layout ISO 11064-3:1999/Cor 1:2002
- ISO 11062-3:2004 Part 4: Layout and dimensions of workstations
- ISO 11062-3:2005 Part 6: Environmental requirements for control centres
- ISO/IEC 11172 MPEG-1
- ISO 11170:2003 Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics
- ISO/IEC 11179 Information Technology –- Metadata Registries (MDR)
- ISO/IEC 11179-1:2004 Part 1: Framework
- ISO/IEC 11179-2:2005 Part 2: Classification
- ISO/IEC 11179-3:2003 Part 3: Registry metamodel and basic attributes
- ISO/IEC 11179-4:2004 Part 4: Formulation of data definitions
- ISO/IEC 11179-5:2005 Part 5: Naming and identification principles
- ISO/IEC 11179-6:2005 Part 6: Registration
- ISO 11180 Postal addressing
- ISO/IEC 11404:1996 Language-independent datatypes (See also General purpose datatypes)
- ISO 11521 Replaced by ISO 15022
- ISO/IEC 11578:1996 Information technology -- Open Systems Interconnection -- Remote procedure call (RPC)
- ISO 11783 aka. IsoBus - J1939-based communication protocol for the agriculture industry.
- ISO/IEC 11801 Information technology – Generic cabling for customer premises
- ISO 11898 Road vehicles—Controller area network (CAN)
- ISO 12006 Building construction. Organization of information about construction works.
- ISO 13239 High-level data link control (HDLC) procedures
- ISO/IEC 13249 SQL multimedia and application packages
- ISO/IEC 13250 Topic map
- ISO 13346 Volume and file structure of write-once and rewritable media, which UDF is based on.
- ISO 13370 Thermal performance of buildings - Heat transfer via the ground - Calculation methods
- ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
- ISO 13406-1:1999 Part 1: Introduction
- ISO 13406-2:1002 Part 2: Ergonomic requirements for flat panel displays
- ISO 13407:1999 Human-centred design processes for interactive systems
- ISO 13450 110 film format
- ISO 13485:2003 Comprehensive management system for the design and manufacture of medical devices.
- ISO 13490 Information technology: Volume and file structure of read-only and write-once compact disk media for information interchange
- ISO 13567/1 to 3 Technical product documentation; Organization and naming of layers for Computer-aided design (CAD)
- ISO/IEC 13568:2002 Information Technology – Z Formal Specification Notation – Syntax, Type System and Semantics
- ISO 13616 Bank Account Numbers (IBAN)
- ISO 13849-1 Safety of machinery, Safety related parts of control systems, General principles for design
- ISO/IEC 13818 MPEG-2
- ISO 14000 Environmental Management Standards in production environments
- ISO 14001 Environmental Management
- ISO 14064 Greenhouse Gases
- ISO 14443 contactless smart ? cards aka RFID
- ISO/IEC 14496 MPEG-4
- ISO 14644 Standards Cleanrooms and associated controlled environments
- ISO 14644-1 Classification of Air Cleanliness
- ISO 14644-2 Testing and Monitoring to prove Compliance
- ISO 14644-3 Metrology & Test Methods
- ISO 14644-4 Design, Construction and Start-up
- ISO 14644-5 Operations
- ISO 14644-6 Vocabulary
- ISO 14644-7 Separative Devices
- ISO 14644-8 Classification of Airborne Molecular Contamination
- ISO 14644-9 Clean Surfaces
- ISO 14651 Information technology: International string ordering and comparison
- ISO 14698 Standards
- ISO-14698-1 Bio-contamination Control - General Principles
- ISO-14698-2 Evaluation & Interpretation of Bio-contamination Data
- ISO 14750 Information technology – Open Distributed Processing – Interface Definition Language
- ISO/IEC 14755 Input methods to enter unicode characters from ISO/IEC 10646
- ISO 14915 Software ergonomics for multimedia user interfaces
- ISO 14915-1:2002 Part 1: Design principles and framework
- ISO 14915-2:2003 Part 2: Multimedia navigation and control
- ISO 14915-3:2002 Part 3: Media selection and combination
- ISO/IEC 14977 Extended Backus-Naur Form (EBNF)
- ISO/IEC 14882 Programming Languages — C++
- ISO 15000 Electronic business eXtensible Markup Language ebXML
- ISO 15000-1:2004 Part 1: Collaboration-protocol profile and agreement specification (ebCPP)
- ISO 15000-2:2004 Part 2: Message service specification (ebMS)
- ISO 15000-3:2004 Part 3: Registry information model specification (ebRIM)
- ISO 15000-4:2004 Part 4: Registry services specification (ebRS)
- ISO 15000-5:2005 Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)
- ISO 15022 Securities: Scheme for messages(Data Field Dictionary)
- ISO 15099 Thermal performance of windows, doors and shading devices – Detailed calculations
- ISO 15189 Medical laboratories – Particular requirements for quality and competence
- ISO 15288 Systems engineering – System life cycle processes
- ISO/IEC 15291: Information technology – Programming languages – Ada Semantic Interface Specification (ASIS)
- ISO/IEC 15408 Common Criteria – Evaluation Criteria for Information Technology Security
- ISO/IEC 15434 2D Data Matrix barcode
- ISO/IEC 15444 JPEG 2000
- ISO/IEC 15445:2000 ISO HTML, a subset of Hypertext Markup Language (HTML) 4
- ISO/IEC 15504 Framework for the assessment of software processes, also known as SPICE (Software Process Improvement and Capability Determination)।
- ISO 15614-13:2002 Specification and qualification of welding procedures for metallic materials-Welding procedure test-
- ISO 15686 Service life planning for constructive works in 10 parts
- ISO 15693 Transponders
- ISO 15706 International Standard Audiovisual Number
- ISO 15707 International Standard Musical Work Code
- ISO 15836 The Dublin Core metadata element set
- ISO 15897 Standard for the registration of new POSIX locales and POSIX charmaps
- ISO 15924 Codes for the representation of names of scripts
- ISO 15930 Portable Document Format PDF
- ISO/IEC 15948:2003. Portable Network Graphics PNG
- ISO/IEC 16500 Generic Digital Audio-Visual Systems DAVIC
- ISO 16701:2003 Ergonomics of human-system interaction, Guidance on accessibility for human-computer interfaces
- ISO/IEC 16262. ECMAScript
- ISO 16750 Road vehicles—Environmental conditions and testing for electrical and electronics equipment.
- ISO/TS 16949 Quality management systems—Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
- ISO 16982:2002 Ergonomics of human-system interaction, Usability methods supporting human-centred design
- ISO/IEC 17024:2003 specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for personnel
- ISO/IEC 17025 General requirements for competence of test and calibration laboratories
- ISO/IEC 17799 Information technology: Code of practice for information security management
- ISO/IEC 17894 Ships and marine technology - Computer applications - General principles for development and use of PES in marine applications
- ISO 18000-7 Wireless standard for active RFID (Radio Frequency Identification)
- ISO/IEC 18004: QR Code Standardization
- ISO/IEC 18009: Information technology – Programming languages – Ada: Conformity assessment of a language processor (ACATS)
- ISO 18152:2003 Ergonomics of human-system interaction, Specification for the process assessment of human-system issues
- ISO 18185: Wireless standard for electronic seals using active RFID (Radio Frequency Identification)
- ISO 18245 standard concerning the assignment of Merchant Category Codes (MCC) in retail financial services
- ISO 18529:2000 Ergonomics of human-system interaction, Human-centred lifecycle process descriptions (available in English only)
- ISO 18629 standardized Process Specification Language (PSL)।
- ISO 19005 PDF
- ISO 19011 standard providing guidelines for quality and environmental management systems auditing
- ISO 19092-1 Financial Services – Security – Part 1: Security framework
- ISO 19092-2 Financial Services – Security – Part 2: Message syntax and cryptographic requirements
- ISO 19101 Geographic Information: Reference model
- ISO 19105 Geographic Information: Conformance and testing
- ISO 19107 Geographic Information: Spatial schema
- ISO 19108 Geographic Information: Temporal schema
- ISO 19109 Geographic Information: Rules for Application Schema
- ISO 19110 Geographic Information: Feature cataloguing methodology
- ISO 19111 Geographic Information: Spatial referencing by coordinates
- ISO 19111 Geographic Information: Spatial referencing by identifier
- ISO 19113 Geographic Information: Quality principles
- ISO 19114 Geographic Information: Quality evaluation procedures
- ISO 19115 Geographic Information: Metadata
- ISO 19123 Geographic Information: Coverage schema
- ISO 19128 Geographic Information: Web Map Service
- ISO 19131 Geographic Information: Data product specification
- ISO 19136 Geographic Information: Geography Markup Language
- ISO/IEC 19501 Unified Modeling Language (UML)
- ISO/IEC 19502 Meta-Object Facility (MOF)
- ISO/IEC 19503 XML Metadata Interchange (XMI)
- ISO/IEC 19757 Document Schema Definition Languages (DSDL)
- ISO/IEC FDIC 19757-2 Regular-grammar-based validation RELAX NG
- ISO/IEC 19757-3 Rule-based validation – Schematron
- ISO/IEC 19790 Security requirements for cryptographic modules (see also FIPS 140)
ISO 20000–ISO 29999[संपादित करें]
- ISO/IEC 20000:2005 IT Service Management System (based on BS15000)
- ISO 20022 Financial Services - universal financial industry message scheme
- ISO/IEC TR 20943 Information technology - Procedures for achieving metadata registry content consistency
- ISO/IEC TR 20943-1:2003 Part 1: Data elements
- ISO/IEC TR 20943-3:2004 Part 3: Value domains
- ISO 22000 Food safety management systems—Requirements for any organization in the food chain
- ISO/TS 22003 Food safety management systems—Requirements for bodies providing audit and certification of food safety management systems
- ISO/IEC TR 22250 Regular Language description for XML – (RELAX)
- ISO/IEC TR 22250-1:2002 RELAX Core
- ISO/IEC 23270:2003 C# Programming Language
- ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1 (in publication as of 2005-12)
- ISO/IEC 23360-1 -- Part 1: Generic specification
- ISO/IEC 23360-2 -- Part 2: Specification for IA32 architecture
- ISO/IEC 23360-3 -- Part 3: Specification for IA64 architecture
- ISO/IEC 23360-4 -- Part 4: Specification for AMD64 architecture
- ISO/IEC 23360-5 -- Part 5: Specification for PPC32 architecture
- ISO/IEC 23360-6 -- Part 6: Specification for PPC64 architecture
- ISO/IEC 23360-7 -- Part 7: Specification for S390 architecture
- ISO/IEC 23360-8 -- Part 8: Specification for S390X architecture
- ISO 23950 Library standard ANSI/NISO Z39.50 - Protocol for searching and retrieving information, usually from bibliographic records
- ISO/IEC 24727 Identification Cards—Integrated Circuit Card Programming Interfaces
- ISO/IEC 24727-1 -- Part 1: Architecture
- ISO/IEC FCD 24727-2 -- Part 2: Generic card interface
- ISO/IEC FCD 24727-3 -- Part 3: Application interface
- ISO/IEC CD 24727-4 -- Part 4: API Administration
- ISO/IEC WD 24727-5 -- Part 5: Testing
- ISO/IEC WD 24727-6 -- Part 6: Registration authority procedures for the authentication protocols for interoperability
- ISO/IEC DIS 25961 Recommended Practice for Architectural Description of Software-Intensive Systems. See IEEE 1471
- ISO26000 Guideline about Social Responsibility also called ISO SR
- ISO/IEC 26300: OpenDocument Format (.odf)
- ISO/IEC 27001 Information technology—Security techniques—Information security management systems—Requirements
ISO 30000–ISO 39999[संपादित करें]
- ISO 32000 - Portable Document Format.
See also[संपादित करें]
External links[संपादित करें]
- ISO Standards The complete list of all ISO published standards.
- ISO 14644 and ISO 14698 Standards through IEST
![]() | यह लेख एक आधार है। जानकारी जोड़कर इसे बढ़ाने में विकिपीडिया की मदद करें। |